anchor-fasteners
To Hold Tight & Right
Anywhere Everywhere ....
IntelloTech Inspiring Support Solutions
Fasteners

Fasteners serve a definite purpose in the construction and installation . They provide the holding strength for anything which needs to be put in a certain place for all the times. The IntelloTECH fasteners are made after calculated engineering details taken into account and the chances of error have been minimised in these fasteners and bolts. The fasteners also come handy where the installation of heavy appliances is concerned.
These fasteners provide easy, fast and convenient support for installation of sanitary equipments like toilet seats, wash basins, geysers without much harm to the tiles since they can be used over the tiles. Besides they give liberty for changing the fixture position also. They are also useful for installation of heavy sign boards, guard rails and lighting fixtures.

Full Threaded Rod Reference Thickness In mm Length mtr
ITTR-01 6 1
ITTR-02 8 1
ITTR-03 10 1
ITTR-04 12 1
ITTR-05 16 1

Full Threaded Rod
1 mtr long threaded rods. The rods can be cut into pieces as per the desired length for various installations.

Jointer Nut Reference Thickness/Size mm Length mm
ITJN-101 8 30
ITJN1-02 10 40
ITJN-103 12 50
ITJN-104 16 50

Nuts & Washers Reference Thickness/Size mm
ITNW-01 8
ITNW-02 10
ITNW-03 12
ITNW-04 16

3 Leaf Bolt Shield
Reference Thickness/Size mm
ITLF-01 8x40
ITLF-02 10x50
ITLF-03 12x60
ITLF-04 16x95

Installation of 3 Leaf Bolt Shield
Make a hole in the wall exactly equal to the OD(outer diameter) of the fastener Take out the debris.

Place fastener in the hole till it is fully inserted

With a nut and washer put at the end insert the bolt or rod into the fastener hole

As the rod is fully tightened the leaves open up and are fixed firmly in the wall giving a lifelong hold for the rod and the object on the rod

 

 

Hammer Drive Anchor Fastener Reference Thickness/Size mm
ITHF-01 6x70
ITHF-02 8x70
ITHF-03 10x70
ITHF-04 10x100
ITHF-05 12x100
ITHF-06 16x100

1. 3 leaf bolt fasteners are useful where installation of heavy equipments with deep setting is required with spacers.

2. Increasing fixtures thickness capabilities

3. Solves difficult installation problems

Installation of Hammer Drive Anchor Fastener

Make a hole in the wall exactly equal to the OD(outer diameter) of the fastener Take out the debris

Place fastener in the hole till it is fully inserted

Insert pin inside the fastener hole strike with hammer to drlve the pin full length

As the pin is fully driven inside the fastener it forces open the fastener at the other cleft end fixing it firmly in the wall